Home  >  Hot PRODUCT  >  Customized Electrical Product Mould Company  > 

cable fuse cutout mould insulating for communal facilities Mings

cable fuse cutout mould insulating for communal facilities Mings

cable fuse cutout mould insulating for communal facilities Mings

Trade Terms
Supply Ability
10 set / Month
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Get Latest Price
Get the latest price
Quantity Needed:
Application Scope
Mings Electricity Technology's power transmission is widely applicable in the Manufacturing Industrial Parts Power Transmission industry.Mings Electricity Technology is rich in industrial experience and is sensitive about customers' needs. We can provide comprehensive and one-stop solutions based on customers' actual situations.
Product Details
With a focus on quality, Mings Electricity Technology pays great attention to the details of power distribution sulutions.Mings Electricity Technology has great production capability and excellent technology. We also have comprehensive production and quality inspection equipment. power distribution sulutions has fine workmanship, high quality, reasonable price, good appearance, and great practicality.
Company Advantages
1. Mings composite line post insulator mould has passed rigorous testing. The testing proves that each medical product meets the safety standards put in place by various governing bodies, such as the FDA, CSA, CE, and UL.
2. In a flock of composite line post insulator mould , fuse cutout mould has many good virtues such as [拓展关键词.
3. After putting quality-oriented into operation, Mings has gained much more fame than before.

Composite Insulator for Electrified Railway Mould

This kind of mould can produce Composite Insulator for Electrified Railway mould, including Wrist-arm Composite Insulator, Post Composite Insulator and Tensile Composite Insulator, with voltage grade ranging from 3 k to 25 kv.
We can provide mould according to following requirements:
The diameter of core rod ranges from φ50 mm to φ90 mm for Wrist-arm Composite Insulator and Post Composite Insulator, and the diameter of core rod ranges from φ18 mm to φ50 mm for Tensile Composite insulator and Post Composite Insulator.
According to the electrical performance of product, the cavity length ranges from 300 mm to 1700 mm.
Long product can be injected step by step.


3kv Railway Insulator

25kv Railway Insulator

25kv Railway Insulator


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.



By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.


The cold runner block device consists of three parts.

1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.

2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.

3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.


1-Product analysis

2-Mould design

3-Incoming inspection

4-CNC processing

5-Heat treatment

6-Shed block finishing

7-Fine grinding

8-Electroplating and polishing


10-Mould test

11-Sample inspection


Company Features
1. Mings takes dominant position in fuse cutout mould market.
2. The market share of this product overseas has increased year by year, and we have won many cooperators in many countries.
3. We make a big commitment to internal and external customer satisfaction and to best practice decisions in every facet of the business. Please contact. Mings Electricity Technology (Dongguan) Ltd. firmly believes that quality is above everything else. Please contact. We strive to create products with better environmental performance and technologies that contribute to sustainable mobility, while our industrial activities can improve economic and social conditions. Please contact.
Favorable rate
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...