Mings  > 

AI - Page Sitemap

 > 

Mings realiable composite suspension insulator mould factory price for suburb

Mings realiable composite suspension insulator mould factory price for suburb

Mings realiable composite suspension insulator mould factory price for suburb

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
power distribution is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.Supported by advanced technology, Mings Electricity Technology has a great breakthrough in the comprehensive competitiveness of power distribution, as shown in the following aspects.
  • v s
Company Advantages
1. Supported by highly proficient workers, Mings composite suspension insulator mould is delicately crafted and has an aesthetically-pleasing appearance.
2. The quality of this product is checked thoroughly to ensure that a defect-free product is provided.
3. The product has gained remarkable sales in the global market and has a good market outlook.
4. The product has so many economic benefits and will be further applied in the market.


Composite Insulator for Electrified Railway Mould


This kind of mould can produce Composite Insulator for Electrified Railway mould, including Wrist-arm Composite Insulator, Post Composite Insulator and Tensile Composite Insulator, with voltage grade ranging from 3 k to 25 kv.
We can provide mould according to following requirements:
The diameter of core rod ranges from φ50 mm to φ90 mm for Wrist-arm Composite Insulator and Post Composite Insulator, and the diameter of core rod ranges from φ18 mm to φ50 mm for Tensile Composite insulator and Post Composite Insulator.
According to the electrical performance of product, the cavity length ranges from 300 mm to 1700 mm.
Long product can be injected step by step.


SUCCESSFUL CASE


Mings realiable composite suspension insulator mould factory price for suburb-1


3kv Railway Insulator

Mings realiable composite suspension insulator mould factory price for suburb-2


25kv Railway Insulator

Mings realiable composite suspension insulator mould factory price for suburb-3


25kv Railway Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings realiable composite suspension insulator mould factory price for suburb-4
Mings realiable composite suspension insulator mould factory price for suburb-5
Mings realiable composite suspension insulator mould factory price for suburb-6


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings realiable composite suspension insulator mould factory price for suburb-7

Mings realiable composite suspension insulator mould factory price for suburb-8
Mings realiable composite suspension insulator mould factory price for suburb-9


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings realiable composite suspension insulator mould factory price for suburb-10


MOULD PRODUCTION PROCESS


Mings realiable composite suspension insulator mould factory price for suburb-11


1-Product analysis

Mings realiable composite suspension insulator mould factory price for suburb-12


2-Mould design

Mings realiable composite suspension insulator mould factory price for suburb-13


3-Incoming inspection


Mings realiable composite suspension insulator mould factory price for suburb-14


4-CNC processing

Mings realiable composite suspension insulator mould factory price for suburb-15


5-Heat treatment

Mings realiable composite suspension insulator mould factory price for suburb-16


6-Shed block finishing


Mings realiable composite suspension insulator mould factory price for suburb-17


7-Fine grinding

Mings realiable composite suspension insulator mould factory price for suburb-18


8-Electroplating and polishing

Mings realiable composite suspension insulator mould factory price for suburb-19


9-Assembling


Mings realiable composite suspension insulator mould factory price for suburb-20


10-Mould test

Mings realiable composite suspension insulator mould factory price for suburb-21


11-Sample inspection

Mings realiable composite suspension insulator mould factory price for suburb-22


12-Package




Company Features
1. After participating in the composite suspension insulator mould industry for many years, Mings Electricity Technology (Dongguan) Ltd. is highly recognized.
2. Our production plant is located in the Mainland, China. It is certified to the industry’s highest quality and excellence standards for health, safety, product quality, and environmental management.
3. Being passionate and empowered, our mission is to make a real difference each day for consumers and businesses around the world. We hold our customers and consumers in the highest regard and place them at the center of what we do. We understand our customers and consumers better than our competitors do.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...