Mings  > 

AI - Page Sitemap

 > 

Mings realiable electrical product mould good quality for countryside

Mings realiable electrical product mould good quality for countryside

Mings realiable electrical product mould good quality for countryside

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Mings surge arrester mould is well manufactured throughout the entire process. It has to go through complicated processes such as extraction, mixture, cutting, shaping, and final treatment. It does not explode under the impact
2. People can use it to transform the chemical energy into luminous energy or electric energy depending on their daily needs. It is unbreakable. The breakage probability during transportation and installation is negligible
3. It demonstrates good isolation of body movements. The sleepers do not disturb each other because the material used absorbs the movements perfectly. It is designed according to IEC, ANSI, and GB international standards


Composite Insulator for Electrified Railway Mould


This kind of mould can produce Composite Insulator for Electrified Railway mould, including Wrist-arm Composite Insulator, Post Composite Insulator and Tensile Composite Insulator, with voltage grade ranging from 3 k to 25 kv.
We can provide mould according to following requirements:
The diameter of core rod ranges from φ50 mm to φ90 mm for Wrist-arm Composite Insulator and Post Composite Insulator, and the diameter of core rod ranges from φ18 mm to φ50 mm for Tensile Composite insulator and Post Composite Insulator.
According to the electrical performance of product, the cavity length ranges from 300 mm to 1700 mm.
Long product can be injected step by step.


SUCCESSFUL CASE


Mings realiable electrical product mould good quality for countryside-1


3kv Railway Insulator

Mings realiable electrical product mould good quality for countryside-2


25kv Railway Insulator

Mings realiable electrical product mould good quality for countryside-3


25kv Railway Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings realiable electrical product mould good quality for countryside-4
Mings realiable electrical product mould good quality for countryside-5
Mings realiable electrical product mould good quality for countryside-6


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings realiable electrical product mould good quality for countryside-7

Mings realiable electrical product mould good quality for countryside-8
Mings realiable electrical product mould good quality for countryside-9


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings realiable electrical product mould good quality for countryside-10


MOULD PRODUCTION PROCESS


Mings realiable electrical product mould good quality for countryside-11


1-Product analysis

Mings realiable electrical product mould good quality for countryside-12


2-Mould design

Mings realiable electrical product mould good quality for countryside-13


3-Incoming inspection


Mings realiable electrical product mould good quality for countryside-14


4-CNC processing

Mings realiable electrical product mould good quality for countryside-15


5-Heat treatment

Mings realiable electrical product mould good quality for countryside-16


6-Shed block finishing


Mings realiable electrical product mould good quality for countryside-17


7-Fine grinding

Mings realiable electrical product mould good quality for countryside-18


8-Electroplating and polishing

Mings realiable electrical product mould good quality for countryside-19


9-Assembling


Mings realiable electrical product mould good quality for countryside-20


10-Mould test

Mings realiable electrical product mould good quality for countryside-21


11-Sample inspection

Mings realiable electrical product mould good quality for countryside-22


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. specializes in producing electrical product mould of great fineness.
2. In a global economic environment, we ship our products across China and to other countries, including America, Australia, Japan, and South Africa.
3. Conducting business responsibly is the foundation of all we do. We will keep learn and practice how socially, ethically and environmentally business practices contribute to better conditions in responsible sourcing, health, and safety. Call!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...