Mings  > 

AI - Page Sitemap

 > 

Mings realiable surge arrester mould housed for suburb

Mings realiable surge arrester mould housed for suburb

Mings realiable surge arrester mould housed for suburb

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Such design of surge arrester mould bestows electrical product mould with great beauty. It has better resistance to damage from vandals
2. Most of customers consider it to be a necessity in the field. It carries an excellent rating for exposure to ozone
3. Adopting passive and wireless electromagnetic induction, the product is able to provide a smooth writing experience that every move of the hand is followed with unerring accuracy. It has good thermostability and can work over a wide temperature range
4. The product is equipped with all the safety systems. The function of automatic diagnosis enables it to detect the faults of the instruments by alarming. The risk of mechanical failure of such products is small
5. The product has very high ratings when it comes to CRI. Its light is close to the daylight's value, reflecting colors truly and naturally. It does not easily form a concentrated discharge path or develop a partial arc


Lightning Arrester Mould


This kind of mould can produce Polymeric Housed Metal Oxide Arrester with voltage grade ranging from 10 kv to 35 kv.
We can provide mould according to following requirements:
According to the mechanical strength of product, the diameter of core rod ranges from φ45 mm to φ150 mm.
According to the electrical performance of product, the cavity length ranges from 100 mm to 1500 mm.


SUCCESSFUL CASE


Mings realiable surge arrester mould housed for suburb-1


24kv Lightning Arreste

Mings realiable surge arrester mould housed for suburb-2


36kv Lightning Arreste


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings realiable surge arrester mould housed for suburb-3
Mings realiable surge arrester mould housed for suburb-4
Mings realiable surge arrester mould housed for suburb-5


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings realiable surge arrester mould housed for suburb-6

Mings realiable surge arrester mould housed for suburb-7
Mings realiable surge arrester mould housed for suburb-8


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings realiable surge arrester mould housed for suburb-9


MOULD PRODUCTION PROCESS


Mings realiable surge arrester mould housed for suburb-10


1-Product analysis

Mings realiable surge arrester mould housed for suburb-11


2-Mould design

Mings realiable surge arrester mould housed for suburb-12


3-Incoming inspection


Mings realiable surge arrester mould housed for suburb-13


4-CNC processing

Mings realiable surge arrester mould housed for suburb-14


5-Heat treatment

Mings realiable surge arrester mould housed for suburb-15


6-Shed block finishing


Mings realiable surge arrester mould housed for suburb-16


7-Fine grinding

Mings realiable surge arrester mould housed for suburb-17


8-Electroplating and polishing

Mings realiable surge arrester mould housed for suburb-18


9-Assembling


Mings realiable surge arrester mould housed for suburb-19


10-Mould test

Mings realiable surge arrester mould housed for suburb-20


11-Sample inspection

Mings realiable surge arrester mould housed for suburb-21


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. is a leading manufacturer of top-class electrical product mould .
2. Mings Electricity Technology (Dongguan) Ltd. has a number of high-level knowledge and technical staff to help better guarantee the quality of railway insulator mould.
3. We have always taken great care to manufacture environmentally. We are committed to reducing climate impact and optimizing resource efficiency throughout our operations.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...