Mings  > 

AI - Page Sitemap

 > 

Mings runner composite suspension insulator mould promotion for countryside

Mings runner composite suspension insulator mould promotion for countryside

Mings runner composite suspension insulator mould promotion for countryside

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Mings Electricity Technology adheres to the 'customer first' principle to provide quality services for customers.
Company Advantages
1. Developing the design for Mings injection mould involves four main factors. They are respectively the color story, design functionality, technical package, and garment patterns.
2. The product is safe. It has been tested using pH test strips to make sure that the pH level of the fabric ingredients is controlled to the level similar to the surface layer of human skin.
3. This product plays an important design element in interior decoration. It enjoys huge popularity among many designers and architects.
4. People can trust that it is safe to wear. Containing no toxic chemical residues, such as formaldehyde and aromatic amine, it does no harm to people's health.


Hollow Core Insulator Mould


This kind of mould can produce Hollow Core Insulator used in conventional substation, whose volatge can reach 500 kv.
We can provide mould according to following requirements:
According to the mechanical strength of product, the diameter of core rod ranges from φ80 mm to φ4600 mm.
According to the electrical performance of product, the cavity length ranges from 300 mm to 2300 mm.
Long product can be injected step by step.


SUCCESSFUL CASE


Mings runner composite suspension insulator mould promotion for countryside-1


110kv-150kv Hollow Core Insulator

Mings runner composite suspension insulator mould promotion for countryside-2


220kv-330kv Hollow Core Insulator

Mings runner composite suspension insulator mould promotion for countryside-3


500kv Hollow Core Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings runner composite suspension insulator mould promotion for countryside-4
Mings runner composite suspension insulator mould promotion for countryside-5
Mings runner composite suspension insulator mould promotion for countryside-6


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings runner composite suspension insulator mould promotion for countryside-7

Mings runner composite suspension insulator mould promotion for countryside-8
Mings runner composite suspension insulator mould promotion for countryside-9


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings runner composite suspension insulator mould promotion for countryside-10


MOULD PRODUCTION PROCESS


Mings runner composite suspension insulator mould promotion for countryside-11


1-Product analysis

Mings runner composite suspension insulator mould promotion for countryside-12


2-Mould design

Mings runner composite suspension insulator mould promotion for countryside-13


3-Incoming inspection


Mings runner composite suspension insulator mould promotion for countryside-14


4-CNC processing

Mings runner composite suspension insulator mould promotion for countryside-15


5-Heat treatment

Mings runner composite suspension insulator mould promotion for countryside-16


6-Shed block finishing


Mings runner composite suspension insulator mould promotion for countryside-17


7-Fine grinding

Mings runner composite suspension insulator mould promotion for countryside-18


8-Electroplating and polishing

Mings runner composite suspension insulator mould promotion for countryside-19


9-Assembling


Mings runner composite suspension insulator mould promotion for countryside-20


10-Mould test

Mings runner composite suspension insulator mould promotion for countryside-21


11-Sample inspection

Mings runner composite suspension insulator mould promotion for countryside-22


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. is in the highest flight in composite suspension insulator mould industry.
2. There is strict testing for quality of railway insulator mould to make satisfying products for customers.
3. We have set our operational principles. We place an extremely strong focus on rapid response to our customers – turning speed and agility into a key competitive advantage. We work hard to protect the future for our natural resources. So we aim to effectively improve our use of raw materials, energy, and water in the manufacture of our products.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...