Mings  > 

AI - Page Sitemap

 > 

Mings security fuse cutout mould promotion for communal facilities

Mings security fuse cutout mould promotion for communal facilities

Mings security fuse cutout mould promotion for communal facilities

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Mings Electricity Technology insists on the use of high-quality materials and advanced technology to manufacture power transmission. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.Compared with other products in the same category, power transmission has outstanding advantages which are mainly reflected in the following points.
  • v s
Company Advantages
1. Since surge arrester mould technological measures were put forward, fuse cutout mould 's body frame has been highly improved.
2. It is smooth and soft. During the production process, the raising process is carried out to treat the surface of the fabric with sharp teeth, thereby lifting the surface fibers and imparting hairiness and softness.
3. Mings Electricity Technology (Dongguan) Ltd. is able to develop and design fuse cutout mould according to the models, drawings or performance parameters provided by customers.


Composite Insulator for Distribution and Transmission Line Mould


This kind of mould can produce Composite Insulator of Suspension, Line Post and Cross Arm Type for Distribution and Transmission Line, with voltage grade ranging from 10 kv to 1000 kv.
We can provide mould according to following requirements:
According to the mechanical strength of product, the diameter of core rod ranges from φ16 mm to φ 60 mm.
According to the electrical performance of product, the cavity length ranges from 200 mm to 2300 mm.
Long product can be injected step by step.


SUCCESSFUL CASE


Mings security fuse cutout mould promotion for communal facilities-1


10kv-20kv Composite Insulator

Mings security fuse cutout mould promotion for communal facilities-2


24kv-36kv Composite Insulator


Mings security fuse cutout mould promotion for communal facilities-3


66kv-150kv Composite Insulator

Mings security fuse cutout mould promotion for communal facilities-4


220kv-500kv Composite Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings security fuse cutout mould promotion for communal facilities-5
Mings security fuse cutout mould promotion for communal facilities-6
Mings security fuse cutout mould promotion for communal facilities-7


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings security fuse cutout mould promotion for communal facilities-8

Mings security fuse cutout mould promotion for communal facilities-9
Mings security fuse cutout mould promotion for communal facilities-10


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings security fuse cutout mould promotion for communal facilities-11


MOULD PRODUCTION PROCESS


Mings security fuse cutout mould promotion for communal facilities-12


1-Product analysis

Mings security fuse cutout mould promotion for communal facilities-13


2-Mould design

Mings security fuse cutout mould promotion for communal facilities-14


3-Incoming inspection


Mings security fuse cutout mould promotion for communal facilities-15


4-CNC processing

Mings security fuse cutout mould promotion for communal facilities-16


5-Heat treatment

Mings security fuse cutout mould promotion for communal facilities-17


6-Shed block finishing


Mings security fuse cutout mould promotion for communal facilities-18


7-Fine grinding

Mings security fuse cutout mould promotion for communal facilities-19


8-Electroplating and polishing

Mings security fuse cutout mould promotion for communal facilities-20


9-Assembling


Mings security fuse cutout mould promotion for communal facilities-21


10-Mould test

Mings security fuse cutout mould promotion for communal facilities-22


11-Sample inspection

Mings security fuse cutout mould promotion for communal facilities-23


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. is a professional manufacturing company in China. We have the proven ability to deliver cost-effective products such as surge arrester mould .
2. Mings Electricity Technology (Dongguan) Ltd. has built the complete quality and management guarantee system, obtained the ISO9001 certificate.
3. Providing sincere and valuable customer services to clients are the goals we strive for. We assist our valued customer to design and develop their products by standing on the creativity & innovative foot. Our company aims to be a long term, reliable supplier with a wide product range and solid product quality. We will put more effort into improving our manufacturing abilities. Our business philosophy: "To give the best service, make the best quality products". We will stand firm in the market by providing outstanding product quality. We have adopted an efficient process to achieve our sustainability goals. We mainly reduce greenhouse gas emissions, energy consumption, solid landfill waste, and water consumption.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...