Mings  > 

AI - Page Sitemap

 > 

Mings security hollow core insulator mould good quality for suburb

Mings security hollow core insulator mould good quality for suburb

Mings security hollow core insulator mould good quality for suburb

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Mings cold shrink termination kit mould has passed various kinds of tests according to international lighting standards. In some cases, some even tougher standards such as vibration test are adopted to make sure that it is going to last. It is done by the pultrusion process
2. The product is widely recognized by our clients, showing the great market potential. It is coated to protect the core from weathering and moisture-damaging effects
3. The product has desired structural hardness. The quenching process of heat treatment has greatly enhanced metal toughness and hardness. It carries an excellent rating for exposure to ozone
4. This product is known for its system reliability. It can perform the same task endlessly in the same way without loss. It has good seismic behavior and will prevent serious damage or collapse in a major earthquake


Cable Accessory Mould


This kind of mould can produce various types of Cable Accessories, including Cable Rear Connector, Cold Shrink Cable Terminal and so on.
We can provide mould according to following requirements:
It meets European or American standards.


SUCCESSFUL CASE


Mings security hollow core insulator mould good quality for suburb-1


Cable Rear Connector

Mings security hollow core insulator mould good quality for suburb-2


Cold Shrink Cable Terminal


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings security hollow core insulator mould good quality for suburb-3
Mings security hollow core insulator mould good quality for suburb-4
Mings security hollow core insulator mould good quality for suburb-5


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings security hollow core insulator mould good quality for suburb-6

Mings security hollow core insulator mould good quality for suburb-7
Mings security hollow core insulator mould good quality for suburb-8


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings security hollow core insulator mould good quality for suburb-9


MOULD PRODUCTION PROCESS


Mings security hollow core insulator mould good quality for suburb-10


1-Product analysis

Mings security hollow core insulator mould good quality for suburb-11


2-Mould design

Mings security hollow core insulator mould good quality for suburb-12


3-Incoming inspection


Mings security hollow core insulator mould good quality for suburb-13


4-CNC processing

Mings security hollow core insulator mould good quality for suburb-14


5-Heat treatment

Mings security hollow core insulator mould good quality for suburb-15


6-Shed block finishing


Mings security hollow core insulator mould good quality for suburb-16


7-Fine grinding

Mings security hollow core insulator mould good quality for suburb-17


8-Electroplating and polishing

Mings security hollow core insulator mould good quality for suburb-18


9-Assembling


Mings security hollow core insulator mould good quality for suburb-19


10-Mould test

Mings security hollow core insulator mould good quality for suburb-20


11-Sample inspection

Mings security hollow core insulator mould good quality for suburb-21


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. has a production base, specializing in the production of hollow core insulator mould .
2. Our goal is to strengthen long term customer loyalty. We promise we will try our best to fulfill our commitments and maintain effective communication with our clients. This is useful for clients to build their trust and tolerance to us.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...