Mings  > 

AI - Page Sitemap

 > 

Mings shrink fuse cutout mould good quality for communal facilities

Mings shrink fuse cutout mould good quality for communal facilities

Mings shrink fuse cutout mould good quality for communal facilities

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The manufacturing process of Mings composite line post insulator mould is complicated. This process involves preparing the pattern, stitching, lasting (forming the final shoe) and final assembly. It does not explode under the impact
2. This product helps reduce energy bills. Using such an appliance will definitely cut the spending at home, workplace, or industries. It is technically and economically suitable for wet areas
3. The product has characteristics of high intensity and durability thanks to the adoption of the quality system. Its reliable mechanical strength is proved by 120% rated mechanical loads 24-h withstand test
4. Tests and analyzed data show that the performance of this product can meet the needs of customers. It has a low energy surface with good hydrophobicity


Composite Insulator for Electrified Railway Mould


This kind of mould can produce Composite Insulator for Electrified Railway mould, including Wrist-arm Composite Insulator, Post Composite Insulator and Tensile Composite Insulator, with voltage grade ranging from 3 k to 25 kv.
We can provide mould according to following requirements:
The diameter of core rod ranges from φ50 mm to φ90 mm for Wrist-arm Composite Insulator and Post Composite Insulator, and the diameter of core rod ranges from φ18 mm to φ50 mm for Tensile Composite insulator and Post Composite Insulator.
According to the electrical performance of product, the cavity length ranges from 300 mm to 1700 mm.
Long product can be injected step by step.


SUCCESSFUL CASE


Mings shrink fuse cutout mould good quality for communal facilities-1


3kv Railway Insulator

Mings shrink fuse cutout mould good quality for communal facilities-2


25kv Railway Insulator

Mings shrink fuse cutout mould good quality for communal facilities-3


25kv Railway Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings shrink fuse cutout mould good quality for communal facilities-4
Mings shrink fuse cutout mould good quality for communal facilities-5
Mings shrink fuse cutout mould good quality for communal facilities-6


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings shrink fuse cutout mould good quality for communal facilities-7

Mings shrink fuse cutout mould good quality for communal facilities-8
Mings shrink fuse cutout mould good quality for communal facilities-9


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings shrink fuse cutout mould good quality for communal facilities-10


MOULD PRODUCTION PROCESS


Mings shrink fuse cutout mould good quality for communal facilities-11


1-Product analysis

Mings shrink fuse cutout mould good quality for communal facilities-12


2-Mould design

Mings shrink fuse cutout mould good quality for communal facilities-13


3-Incoming inspection


Mings shrink fuse cutout mould good quality for communal facilities-14


4-CNC processing

Mings shrink fuse cutout mould good quality for communal facilities-15


5-Heat treatment

Mings shrink fuse cutout mould good quality for communal facilities-16


6-Shed block finishing


Mings shrink fuse cutout mould good quality for communal facilities-17


7-Fine grinding

Mings shrink fuse cutout mould good quality for communal facilities-18


8-Electroplating and polishing

Mings shrink fuse cutout mould good quality for communal facilities-19


9-Assembling


Mings shrink fuse cutout mould good quality for communal facilities-20


10-Mould test

Mings shrink fuse cutout mould good quality for communal facilities-21


11-Sample inspection

Mings shrink fuse cutout mould good quality for communal facilities-22


12-Package




Company Features
1. We have great team and great fuse cutout mould .
2. Mings Electricity Technology (Dongguan) Ltd. owns the largest and most advanced railway insulator mould R&D center and laboratory in China.
3. Mings Electricity Technology (Dongguan) Ltd. endeavors to be a responsible and respectable company to its employees, clients and shareholders. Please contact.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...