Mings  >  AI - Page Sitemap  >  Mings terminal electrical product mould promotion for communal facilities
Mings terminal electrical product mould promotion for communal facilities

Mings terminal electrical product mould promotion for communal facilities

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. electrical product mould has a good performance due to its materials having the merits including surge arrester mould . It has good self-cleaning performance under wind and rain
2. The product adapts to market need and is widely used at home and abroad. It is done by the pultrusion process
3. The product exceeds the industry standards of performance, durability, and usability. It is technically and economically suitable for wet areas
4. Product quality is guaranteed because strict quality control processes effectively eliminate defects. It features a very light overall weight with materials of high extension strength


Lightning Arrester Mould


This kind of mould can produce Polymeric Housed Metal Oxide Arrester with voltage grade ranging from 10 kv to 35 kv.
We can provide mould according to following requirements:
According to the mechanical strength of product, the diameter of core rod ranges from φ45 mm to φ150 mm.
According to the electrical performance of product, the cavity length ranges from 100 mm to 1500 mm.


SUCCESSFUL CASE


Mings terminal electrical product mould promotion for communal facilities-1


24kv Lightning Arreste

Mings terminal electrical product mould promotion for communal facilities-2


36kv Lightning Arreste


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.


Mings terminal electrical product mould promotion for communal facilities-3
Mings terminal electrical product mould promotion for communal facilities-4
Mings terminal electrical product mould promotion for communal facilities-5


INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.

Mings terminal electrical product mould promotion for communal facilities-6

Mings terminal electrical product mould promotion for communal facilities-7
Mings terminal electrical product mould promotion for communal facilities-8


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.

Mings terminal electrical product mould promotion for communal facilities-9


MOULD PRODUCTION PROCESS


Mings terminal electrical product mould promotion for communal facilities-10


1-Product analysis

Mings terminal electrical product mould promotion for communal facilities-11


2-Mould design

Mings terminal electrical product mould promotion for communal facilities-12


3-Incoming inspection


Mings terminal electrical product mould promotion for communal facilities-13


4-CNC processing

Mings terminal electrical product mould promotion for communal facilities-14


5-Heat treatment

Mings terminal electrical product mould promotion for communal facilities-15


6-Shed block finishing


Mings terminal electrical product mould promotion for communal facilities-16


7-Fine grinding

Mings terminal electrical product mould promotion for communal facilities-17


8-Electroplating and polishing

Mings terminal electrical product mould promotion for communal facilities-18


9-Assembling


Mings terminal electrical product mould promotion for communal facilities-19


10-Mould test

Mings terminal electrical product mould promotion for communal facilities-20


11-Sample inspection

Mings terminal electrical product mould promotion for communal facilities-21


12-Package




Company Features
1. Our production capacity occupies steadily in the forefront of the electrical product mould industry.
2. surge arrester mould is the driving force for Mings Electricity Technology (Dongguan) Ltd.. Call!
Mingselectrical product mould is manufactured by using the internationally advanced technology. Its advantage of abrasion resistance extends its service life
Mings electrical product mould has a design that caters to the worldwide market. The product is popular for its good corrosion resistance
The materials of Mings surge arrester mould is safe, do no harm to human health. It has obtained the certifications of UL, TUV, CE, etc
Mings electrical product mould is crafted by a team of highly skilled technicians. It has a thermal shrinkage rate of less than 1
The unique design along with new eye-catching appearance can be seen on Mings electrical product mould. It boasts many advantages, such as large transmission capacity and fast power transmission
electrical product mould is suitable for surge arrester mould, with the advantages of surge arrester mould and so on. The product contains no halogen, which makes it environmental-friendly
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...