Home  >  Hot PRODUCT  >  Customized Electrical Product Mould Company  > 

polymeric injection mould good quality for outdoors Mings

polymeric injection mould good quality for outdoors Mings

Polymeric injection mould good quality for outdoors Mings

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • Mings Electricity Technology has professional personnel to provide consumers with intimate and quality services, so as to solve their problems.
Product Comparison
Under the guidance of market, Mings Electricity Technology constantly strives for innovation. power transmission has reliable quality, stable performance, good design, and great practicality.Mings Electricity Technology's power transmission has better quality than other products in the industry, which is specifically shown in the following aspects.
Company Advantages
1. Mings injection mould goes through rigorous inspections and quality controls to ensure quality. From raw materials to finished goods, our inspection team eliminates defects and non-compliance during different stages of the production process.
2. Mings promises that we will check every detail of this product.
3. Each of our employees is very clear that the user's requirements for cable rear connectors mould 's quality and reliability are getting higher and higher.


Composite Insulator for Electrified Railway Mould


This kind of mould can produce Composite Insulator for Electrified Railway mould, including Wrist-arm Composite Insulator, Post Composite Insulator and Tensile Composite Insulator, with voltage grade ranging from 3 k to 25 kv.
We can provide mould according to following requirements:
The diameter of core rod ranges from φ50 mm to φ90 mm for Wrist-arm Composite Insulator and Post Composite Insulator, and the diameter of core rod ranges from φ18 mm to φ50 mm for Tensile Composite insulator and Post Composite Insulator.
According to the electrical performance of product, the cavity length ranges from 300 mm to 1700 mm.
Long product can be injected step by step.


SUCCESSFUL CASE



3kv Railway Insulator


25kv Railway Insulator


25kv Railway Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.



INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.


MOULD PRODUCTION PROCESS



1-Product analysis


2-Mould design


3-Incoming inspection



4-CNC processing


5-Heat treatment


6-Shed block finishing



7-Fine grinding


8-Electroplating and polishing


9-Assembling



10-Mould test


11-Sample inspection


12-Package




Company Features
1. With a solid foundation and technical strength, Mings Electricity Technology (Dongguan) Ltd. is an excellent place for investment in the field of cable rear connectors mould .
2. Our staff all have a background related to the industry. They have passed through professional education and training. They have a good employment history and field experience.
3. Mings insists on the orientation of being a leading electrical product mould enterprise. Inquire! Taking lightning arrester mould as the core drives Mings to go further in the market. Inquire! Mings adheres to the development of a complete supply chain of railway insulator mould. Inquire!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...