Home  >  Hot PRODUCT  >  Customized Electrical Product Mould Company  > 

post hollow core insulator mould supplier for communal facilities Mings

post hollow core insulator mould supplier for communal facilities Mings

Post hollow core insulator mould supplier for communal facilities Mings

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
The power transmission of Mings Electricity Technology is applicable to the following areas.Mings Electricity Technology is committed to providing customers with high-quality power transmission as well as one-stop, comprehensive and efficient solutions.
Enterprise Strength
  • Mings Electricity Technology has established a complete service system to provide professional pre-sales, sales, and after-sales services for customers.
Company Advantages
1. The whole production of Mings drop out fuse mould is completed by a team of experienced professionals who know clearly how to make lean production.
2. The product features the desired luster. When it is cut, scratched, or polished, its metal materials can retain its original luster.
3. The product has a good touch feeling. The wood materials used are selected from the deep forest and are well treated to be free of the burr.
4. The quality of hollow core insulator mould can be proved by our sample testing.


Hollow Core Insulator Mould


This kind of mould can produce Hollow Core Insulator used in conventional substation, whose volatge can reach 500 kv.
We can provide mould according to following requirements:
According to the mechanical strength of product, the diameter of core rod ranges from φ80 mm to φ4600 mm.
According to the electrical performance of product, the cavity length ranges from 300 mm to 2300 mm.
Long product can be injected step by step.


SUCCESSFUL CASE



110kv-150kv Hollow Core Insulator


220kv-330kv Hollow Core Insulator


500kv Hollow Core Insulator


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.



INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.


MOULD PRODUCTION PROCESS



1-Product analysis


2-Mould design


3-Incoming inspection



4-CNC processing


5-Heat treatment


6-Shed block finishing



7-Fine grinding


8-Electroplating and polishing


9-Assembling



10-Mould test


11-Sample inspection


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. now ranks top in R&D and produce of hollow core insulator mould .
2. Mings Electricity Technology (Dongguan) Ltd. emphasizes much on its innovative ability and independent R&D ability.
3. Mings Electricity Technology (Dongguan) Ltd. always seeks long-term development by superior quality. Call! Mings Electricity Technology (Dongguan) Ltd.'s value is to provide high-quality lightning arrester mould for every suppliers. Call! Mings cable rear connectors mould leads the new concept of drop out fuse mould setting a new benchmark in this industry. Call!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...