Home  >  Hot PRODUCT  >  Customized Electrical Product Mould Company  > 

substation railway insulator mould runner for outdoors Mings

substation railway insulator mould runner for outdoors Mings

substation railway insulator mould runner for outdoors Mings

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Mings Electricity Technology pursues excellent quality and strives for perfection in every detail during the production.power distribution sulutions is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.
Company Advantages
1. Mings drop out fuse mould is developed with pretreatment, refined filtration, cleaning and sterilization systems. The R&D team strives to achieve the best water treatment effect by improving its systems.
2. By discarding the dross and selecting the essential, our railway insulator mould has been successful in its drop out fuse mould .
3. It is indicated that railway insulator mould has the features of drop out fuse mould and ideal applied effect.
4. Through collaborative innovation, and joint promotion in railway insulator mould field, Mings Electricity Technology (Dongguan) Ltd. has created new market highlights.


Cable Accessory Mould


This kind of mould can produce various types of Cable Accessories, including Cable Rear Connector, Cold Shrink Cable Terminal and so on.
We can provide mould according to following requirements:
It meets European or American standards.


SUCCESSFUL CASE



Cable Rear Connector


Cold Shrink Cable Terminal


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.



INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.


MOULD PRODUCTION PROCESS



1-Product analysis


2-Mould design


3-Incoming inspection



4-CNC processing


5-Heat treatment


6-Shed block finishing



7-Fine grinding


8-Electroplating and polishing


9-Assembling



10-Mould test


11-Sample inspection


12-Package




Company Features
1. Mings Electricity Technology (Dongguan) Ltd. does an exceptional job on railway insulator mould and solutions.
2. Imported advanced machine are equipped to guarantee the bulk production of lightning arrester mould .
3. Mings Electricity Technology strives to provide one-stop shopping for great convenience. Get an offer! The goal of Mings Electricity Technology (Dongguan) Ltd. is to bolster the technical advantage and become an specialist in the area of fuse cutout mould . Get an offer! We specialize in cutting-edge production technology fro hollow core insulator mould and will create the best value for our customers. Get an offer! Customer trust is the driving force for excellence in Mings Electricity Technology (Dongguan) Ltd.. Get an offer!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...