Home  >  Hot PRODUCT  >  Customized Electrical Product Mould Company  > 

surge arrester mould insulating for communal facilities Mings

surge arrester mould insulating for communal facilities Mings

surge arrester mould insulating for communal facilities Mings

Trade Terms
EXW, FOB, CIF, CNF, DDU, DDP, etc.
Supply Ability
10 set / Month
Port
Guangzhou,Shenzhen
Payment
L/C,D/A,D/P,T/T,western union, moneygram, PAYPAL payments for offline orders.
Packaging Detail
Wooden package
Shipping
BY SEA, BY AIR OR BY EXPRESS
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Mings Electricity Technology has professional production workshops and great production technology. power distribution we produce, in line with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. It is also available in a wide range of types and specifications. Customers' diverse needs can be fully fulfilled.Mings Electricity Technology's power distribution has better quality than other products in the industry, which is specifically shown in the following aspects.
Company Advantages
1. Mings surge arrester mould is developed by experienced R&D members. They have spent many years creating more precise and functional hardware tools and accessories for different usages.
2. Because electrical product mould have a lot of merit, such as surge arrester mould , and etc. , it is for sure that composite suspension insulator mould will have a bright future.
3. So far this Mings branded product is the best seller among its competitors in the market.


Lightning Arrester Mould


This kind of mould can produce Polymeric Housed Metal Oxide Arrester with voltage grade ranging from 10 kv to 35 kv.
We can provide mould according to following requirements:
According to the mechanical strength of product, the diameter of core rod ranges from φ45 mm to φ150 mm.
According to the electrical performance of product, the cavity length ranges from 100 mm to 1500 mm.


SUCCESSFUL CASE



24kv Lightning Arreste


36kv Lightning Arreste


MOULD CHARACTERISTICS


The shed block of mould cavity is made of S136H, the material of high-strength stainless steel, which can makethe service life of the mould up to 100,000 cycles.

After heat treatment, electroplating and polishing for shed block, the surface of produced composite insulator is very smooth and beautiful.

Unique design of vent can easily tear off the edge fin of produed composite insulator to reduce the appearance treatment process.

Provide the best number of mould cavity and automatic demoulding device according to customers'needs to maximize the production efficiency.

Provide cold runner block device according to customer needs to increase output and reduce waste of raw material.

In order to facilitate the users using and maintaining mould, we will equip each set of moulds with operating manual. The manual contains information on the structure of moulds, disassembly and assembly of moulds,maintenance of common faults, etc.



INTRODUCTION OF COLD RUNNER BLOCK DEVICE


Characteristics

By changing the position and number of injection nozzle of injection molding machine, one mould with multi-cavity can be realized to increase output.

By changing the position of injection nozzle, the distance between injection nozzle and product cavity can be reduced to reduce the waste of raw material.


STRUCTURE


The cold runner block device consists of three parts.


1.Runner plate:

It has a circulating water pipe inside , which can keep the temperature down while working . so , it is always in a low temperature working state to ensure that rubber will not vulcanize and thus cause blockage.

Through scientific design, it can change the position and quantity of injection nozzle and ensure the balance of injection at each injecton nozzle.


2.Heat insulation plate:

It is composed of asbestos insulation plate and resin insulation plate, which can minimize heat transferring from heating plate to runner plate, and it has high strength so that it is not easy to break.


3.Heating plate:

It is used to provide heat for mould, so that the temperature of mould can reach and stabilize at the vulcanization temperature of rubber.


MOULD PRODUCTION PROCESS



1-Product analysis


2-Mould design


3-Incoming inspection



4-CNC processing


5-Heat treatment


6-Shed block finishing



7-Fine grinding


8-Electroplating and polishing


9-Assembling



10-Mould test


11-Sample inspection


12-Package




Company Features
1. The main focus of Mings is to integrate design, manufacture, sales and service together.
2. In the market of manufacturing electrical product mould , Mings applies the most advanced technology.
3. Mings Electricity Technology (Dongguan) Ltd. suggests surge arrester mould as its permanent tenet. Call now! We welcome all criticizims form our customers for composite suspension insulator mould . Call now! The basic tenet of Mings Electricity Technology (Dongguan) Ltd. is that injection mould. Call now!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...